Questions? Feedback? powered by Olark live chat software
844-866-6348 Info@RapidFireXboxOne.com    English French German Italian Polish Portuguese Russian Spanish Swedish Arabic Chinese (Simplified)

Introduction

The RapidFireXboxOne Rapid Fire mod offers you the most cutting edge and functional features on the planet. We have managed to pack the mod with a barrage of features. How these features are accessed and modified is the most innovative feature of the programming. In the following texts you will find everything you need to understand and operate the most effective mod on the planet. Always remember that many of these features can be used in conjunction with one another allowing an almost unlimited number of combinations.

Let our Xbox One Rapid Fire help enhance your gaming experience today.

Feature Access

When accessing all the controller features of our Xbox One Rapid Fire Mod you will be using the “LEFT” direction of the dPad and the Touch Pad click. We developed the mod as a Sleeper mod. This means there is no extra button added to your controller.

We have included the ability to add a mod button to allow you even quicker access to all these effective features AND the ability to add up to two remappable buttons which can be programmed as any button you would like.

Use LEFT to activate the PS4 Rapid Fire Mod

LEFT

Use LEFT on the dPad to activate mod functions.

Up

Up on the dPad is used to access secondary modes and other functions

Mod Button

An additional Mod Button can be installed in to your controller or mod. It will enable you to not have to use LEFT on the dPad.

The guide button will flash once (1 times) to signal a feature is turned on (enabled) and Twice (2 Times) to signal it is turned off (disabled).

How to Operate Rapid Fire

How to Activate Rapid Fire – Double tap “LEFT” on the dPad. For an even quicker activation method simple hold the “RT” and tap “LEFT” on the dPad. If your mod has a “MOD” button installed you can simply double press the “MOD” button or hold the “RT” and tap the “MOD” button.

How to Deactivate Rapid Fire – To turn off rapid fire Double tap “LEFT” on the dPad or use any other of the listed methods to activate.

Double Tap LEFT to enable and disable Rapid Fire

Double Tap "LEFT"

Advance controller on the LED flashing by using the Advance Feature Management.

How to operate Burst Fire

Hold Square and tap "LEFT"

How to Activate Burst Fire – Activate Burst Fire by holding the “X” button and tapping “LEFT” on the dPad. The guide button will stay lit to indicate Burst Fire is activated.

You can set the rate of fire of the Burst Fire mode by adjusting within the programming mode.

How to Deactivate Burst Fire – To deactivate hold “X “and tap “LEFT” on the dPad.

How to operate Akimbo Mode

When activated each trigger will be an independent of one another.

How to activate Akimbo Mode

Hold LT and tap "LEFT"

How to Activate Akimbo – To activate Mimic mode hold the “Left Trigger” and tap “LEFT” on the dPad. You may also enable Rapid Fire while Mimic is enabled.

How to Deactivate Akimbo – To Deactivate Mimic mode hold the “LEFT Trigger” and tap “LEFT” on the dPad.

How to operate Mimic

When activated the right trigger will controller both the right trigger and left trigger.

Hold Right Trigger and Tap Up

How to Activate Mimic – To activate Mimic mode holding the “Right Trigger” and tapping “UP” on the dPad.

How to Deactivate Mimic – To Deactivate Mimic mode holding “Right Trigger” and tapping “UP”.

If the akimbo is activated and rapid fire is turned ON than the left trigger will also be rapid fire, otherwise it works as normal allowing you to scope automatically when firing.

How to Change the PS4 Rapid FIre Mod Modes
How to change modes.

Hold "LEFT" or "MOD" button for 4 Seconds

The “LEFT” or “MOD” button must be held for 4 Seconds to change modes.

Each on of the 10 modes may be programmed or adjusted and will retain its programming even when power is removed from the controller.

NEXT MODE – press and holding “LEFT” on the dPad for four (4) seconds or “MOD” Button if one is installed. Every time you change the mode the guide button will flash the corresponding number of the mode.

IE: (2 flashes = Mode 2) (3 flashes = Mode 3)

PREVIOUS MODE – To go back to the previous mode hold the “right trigger” along with the “LEFT” button for 4 seconds.

Learn about RapidFirePS4s Mods Sub Modes
Hold Left and UP

Hold LEFT and UP

Many of the modes of this mod have sub modes or secondary functions. These modify or change the parent mode. Each of the different modes that have sub modes will have their explanations in that mode.

How to activate Sub Modes – Press and hold “UP” and “LEFT” on the dPad. Also remember that if your mod has a button installed you can hold the “MOD” button and “UP” to. Access these sub modes as well.

For example, to change the Jitter sub mode you would HOLD “back” + the “Mod” button then tap ”Y”, the guide button will flash to indicate which sub mode you are currently in.

How to operate Jitter Mode

Jitter takes advantage of a glitch in most COD and FPS games allowing for faster firing of just about all weapons including shotguns and 3-Round burst weapons. This mode may not work on ALL GAMES as it has been patched.

Hold Y and Tap Left to Operate JITTER Mode

Hold Y and tap LEFT

How to Activate Jitter – To activate the Jitter Mod HOLD the “Y” button and tap “LEFT”. Remember you can use the “Mod” button instead of “LEFT”. Jitter has 3 sub modes.

Sub Mode 1:

XXY Jitter

FAST

Sub Mode 2:

XXY Jitter

SLOW

Sub Mode 3:

YY Jitter

How to Operate Drop Shot

Drop Shot lets you go prone as soon as you pull the right trigger and stands you back up when you release it. There are 4 sub modes for standard and tactical layouts.

Hold B and Tap Left to activate Drop Shot

Hold "B" and tap "LEFT"

How to Activate Drop Shot – Hold “B” and tap “LEFT” on the dPad or tap the “MOD” button.

How to Activate Drop Shot (Tactical) – Hold “RIGHT STICK” clicked and tap “LEFT” on the dPad or tap the “MOD” button.

Drop Shot has 4 sub modes and you must always use “B” for changing the sub mode.

SUB MODE 1:

DROP / STAND
AUTOMATICALLY

SUB MODE 2:

DROP / STAND
IF NOT AIMING
DOWN SIGHTS

SUB MODE 3:

DROP ONLY

SUB MODE 4:

DROP ONLY
IF NOT AIMING
DOWN SIGHTS
How to operate Jump Shot

With jump shot enabled, you will jump automatically as soon as you fire.

Hold A and Tap Left to activate Jump Shot

Hold A and tap "LEFT"

How to Activate Jump Shot – Hold “A” and tap “LEFT” on the dPad or tap the “MOD” button.

How to Deactivate Jump Shot – Hold “A” clicked and tap “LEFT” on the dPad or tap the “MOD” button.

SUB MODE 1:

JUMP ONCE

SUB MODE 2:

SLOW
Repeatitive Jump

SUB MODE 3:

MEDIUM
Repetitive Jump

SUB MODE 4:

FAST
Repetitive Jump
How to operate Quick Scope

With Quick Scope active just hold the “LEFT TRIGGER” and you will scope and fire simultaneously when the exact moment accuracy of being scope kicks in. Fine tune Quick Scope with one of its six sub modes.

Hold Left Trigger Tap Up to activate Quick Scope

Hold Left Trigger and Tap "UP"

How to Activate Quick Scope – Hold “Left trigger” and tap “UP”.

How to Deactivate Quick Scope – Hold “Left Trigger” and tap “UP”.

SUB MODE 1:

Rifles / Snipers

SUB MODE 2:

Rifles / Snipers
+ Rapid

SUB MODE 3:

Rifles / Snipers
+ Quickdraw

SUB MODE 4:

Rifles / Snipers
+ Quick Draw
+ Rapid

SUB MODE 5:

Ultra Fast

SUB MODE 6:

Ultra Fast
+ Rapid
How to operate Auto Aim

The Auto Aim is a feature for the left trigger. Auto Aim will work both rapid fire on and off.

Hold A and Tap Up to activate Auto Aim

Hold "A" and tap "UP"

ONLY FOR ZOMBIES, CAMPAIGN AND OFFLINE – DOES NOT WORK ONLINE

How to Activate Auto Aim – Hold “A” and tap “Up”.

How to Deactivate Quick Scope – Hold “A” clicked and tap “UP”.

How to operate Autospotting

This will publicly mark your opponents for you and your team. Auto Spotting has 2 sub modes. When you are aiming at an opponent, they will be marked with an indicator above their head for you and the entire team. Giving your team a significant advantage.

How to operate Autospotting

Hold "R3" and tap "UP"

How to Activate Auto Spotting – To activate HOLD “R3” and tap “UP”.

How to Deactivate Auto Spotting – HOLD “R3” and tap “UP”.

SUB MODE 1:

Only When Aiming
Down Sights

SUB MODE 2:

Always On
How to operate GOW Perfect Active Reload

Having perfectly timed active reloads could be the difference of 32/1 k/d or 1/32 k/d. Activating and programming has been made
easy by simply holding the “RB” and tapping “LEFT”.
This feature has 2 sub modes.

Hold Right Bumper and tap Left to operate Autospotting

Hold "RB" and tap "LEFT"

SUB MODE 1:

Older Gears of Wars

SUB MODE 2:

New Gears of War / 3 and Judgment
How to operate GOW Perfect Active Reload

Set the weapon of your choice here. Hold “UP” on the dpad and tap “RB”. Tap the “RB” 1-6 times to select the weapon of your choice. When you release “UP” on the dpad the guide button will flash 1-6 times to confirm the selection.

Hold Right Bumper and Tap Left

Hold "UP" and tap "Right Bumper"

Older GOW Weapons

  1. Lancer / Hammerburst
  2. Pistols
  3. Shotgun
  4. Sniper / Boomshot

Newer GOW Weapons:

  1. Lancer
  2. HammberBurst
  3. Pistols
  4. Sniper / Boomshot
  5. Shotgun
  6. Retro Lancer
How to operate Sniper Breath

With this enabled you will automatically hold your breath (Press the Left Stick) when you look down your sights.

Hold L3 and Tap Left to operate Sniper Breath

Hold "L3" and tap "LEFT"

How to Activate Auto Sniper – Hold down “LEFT STICK” and tap “LEFT” on the dPad or press the “MOD” button.

How to Deactivate Auto Sniper – Hold down “LEFT STICK” and tap “LEFT” on the dPad or press the “MOD” button.

How to operate Auto Aim

Pressing the Thumbstick to run is a thing of the past. Make your controllers last longer with this automatic feature. With Auto Run enabled you will always be running in game. Auto Run has 3 sub modes.

Hold L3 and Tap Up to activate Auto Aim

Hold "L3" and tap "Up"

How to Activate Auto Run – Hold “L3” and tap “UP”.

How to Deactivate Auto Run – Hold “L3” and tap “UP”.

SUB MODE 1:

Always Run

SUB MODE 2:

Run Suspended When
Prone / Crouch with
B

SUB MODE 3:

Run Suspended When
Prone / Crouch with
"RIGHT STICK"
How to Turn off ALL Features

To turn off all features at once simply HOLD the “LEFT STICK”, “RIGHT STICK” and tap “LEFT” on the dPad.

The guide button will flash 10 times in rapid succession and all features will be off.

Hold R3 + L3 + Tap Left or UP to Turn off all Features on your current mode

Hold down Left Stick, Right Stick and tap Left on the dPAd or tap Up.

This is will turn off ALL features on your CURRENT MODE ONLY

RAPID / BURST PROGRAMMING –

Each rapid fire mode can be programmed to one of 55 different speed between 4 and 40 shots per second. You can also set the burst fire for each mode from 2 – 10 shots per burst.

Enter / Exit Programming Mode

To enter the programming mode you must HOLD both thumbsticks and both triggers for six (6 secs) seconds. You will see the Guide Button Flash for two (2 secs) seconds. Tap “VIEW” to exit.

Change Rapid Fire Speed

Use the “UP” on the dPad to increase the firing rate and “DOWN” to decrease the firing rate. The guide button will flash when increasing or decreasing the speed. If you reach the min or max the guide button will stop flashing.

Change Burst Fire Speed

Change the number of shots fired by tapping “LEFT” on the dPad to increase the number of shots fired when the trigger is pulled and “RIGHT” to decrease the number of shots fired when the trigger is pulled.

Check Rapid Fire Speed

Tap the “Y” to check the Rapid Fire Speed. The Guide Button will flash long to give you the first number and flash short to give you the second number. IE: 2 Long flashes and 4 short flashes would equal 24.)

Check Burst Fire Setting

Tap “A” to check the Burst fire shot quantity. The guide button will flash 2 10 times to indicate the burst fire shot quantity.

Reset Current Mode

To reset the CURRENT mode you are editing to our factory default simply hold the Right Bumper for seven (7 secs) seconds. The Guide button will flash rapidly 10 times to indicate the reset was complete.

MASTER RESET

You must be in programming mode to Master Reset

Nuke the entire thing and reset it to factory default settings by simply holding both sticks down for seven (7 secs) seconds. The guide button will flash slow then fast and back to flashing slow. once this completes the chip has been reset and programming mode has been exited.

Reflex Remapping –

Reflex buttons are additional buttons which can be added to the back of your controller at the time of purchase. Reflex buttons replicate and of the standard controller buttons:

A, B, X, Y, RT, LT, RB, LB, L3, R3, UP, DOWN, LEFT or RIGHT

These Buttons are set by default to replicate A or B. However they can be changed to any of the above mentioned buttons within the controllers programming mode. Once in the programming mode just HOLD one of the Reflex buttons and TAP the button you want to assign to it.

The main LED will flash 3 times quickly to confirm your change.If you tap the controller button which is already assigned to the reflex button, this will disable the button and the main LED will have 1 long flash. The button will then not do anything when pressed until it is reassigned to a new controller button.

 

Competition Mode –

Reflex buttons are legal for most competitions, because of this the RapidFireXboxOne Mod also has a competition mode which can be enabled to make your controller competition legal. This option quickly disables all mods and LED notifications. Leaving only the reflex buttons active. Learn how to activate COMP Mode in the advanced feature management section.

IMPORTANT RAPID FIRE INFORMATION

The rapid fire mod allows you to set the rapid fire speeds up to 40 shots per second but you must be aware that setting the rapid fire to the maximum will NOT work for most games.

All games have limitations on the rates at which weapons can fire.

Our default mode settings are already optimized to the fastest possible speeds for the games / weapons listed in the Mode and Default Speed Chart.

The possibility to change these settings are available for you to experiment with and find settings that best compliment you playing style and to be able to create modes for current and all future games which are not part of the default setup.

ADVANCED FEATURE MANAGEMENT (AFM)

All features have an advanced management option that allows you to disable them. This is especially useful if you find there are features you do not use and do not want the possibility to accidentally activate the feature.

Hold ABXY for 7 seconds to enter AFM

ENTER AFM

To enter the advanced feature management you must have the controller ON and the rapid fire must be OFF. Hold “CIRCLE + TRIANGLE + SQUARE + X” together at the same time for 7 seconds. After 7 seconds you will see the LED indicator flash PURPLE 10 times very fast. Release all the buttons after the flashing stops.

Managing Features

When you are in AFM you can enable or disable any of the features listed to the right by just tapping the corresponding button. When you tap on of the buttons you will see the LED Indicator flash 1 time for enabled and 2 times for disabled.

How to exit AFM – To exit AFM just tap “Left” on the dPad. You will see the LED indicator flash 10 times.

Hold A and Press LEFT on the dPad

JUMP SHOT

Hold B and press LEFT on the dPad to enable and disable Drop Shot

DROP SHOT

Hold X and press LEFT on the dPad to enable and disable Fast Relod

FAST RELOAD

Hold TRIANGLE and press LEFT on the dPad to enable and disable Jitter Mode

JITTER MODE

Hold L3 and Press LEFT on the dPad to enable and disable SNIPER BREATH

SNIPER BREATH

Hold UP and tap Left Trigger to enable and disable QUICK SCOPE

QUICK SCOPE

Tap Left Trigger to enable and disable AUTO AIM

AUTO AIM

Tap Right Trigger to enable and disable Jitter Mode

MIMIC

Hold Touch Pad and CIRCLE to enable and disable AUTOSPOTTING

AUTOSPOTTING

COMPETITION

Press DOWN to enable and disable COMPETITION mode

Hold R2 and LEFT on the dpad to enable and disable Rapid Fire

RAPID FIRE

Hold R2 and LEFT on the dpad to enable and disable Rapid Fire

Hold UP and tap Right Trigger to manipulate LED MODE

LED MODE

LED Mode has 3 settings. The LED will flash ORANGE when changing LED Modes

  1. LED Indicator FLASHES when Rapid if ON
  2. LED Indicator SOLID when Rapid if ON
  3. ON/OFF Indication Only
  4. NO LED CONFIRMATION
You use the LEFT to enable and disable features.

FEATURE ACTIVATION

This option changes which button[s] will be used to activate features. There are 3 options Left Only, Both or Mod Button Only. When changing the LED will flash 1, 2 or 3 times.

  1. Only Left activates MOD
  2. Left and Mod Button Active
  3. MOD button ONLY Active

Subscribe To Save

 

Join our mailing list to receive the latest news and updates from our team.

 Save $5 for just signing up!

You have Successfully Subscribed!